Stock ID : JT-IM-SD07-11
Full Machine View (Front)
Machine Overview
We are offering a well-maintained 2007 Sodick LD55EH2 (55-ton) all-electric injection molding machine manufactured in Japan, equipped with a Yushin YK-350X take-out robot. The machine demonstrates light usage with only 15,136 total operating hours — approximately 10% average utilization over 18 years.
- Manufacturer: Sodick
- Model: LD55EH2
- Year: 2007
- Clamping Force: 55 tons (539 kN)
- Machine Weight: approx. 2,300 kg
- Machine Dimensions: approx. 2,955 × 1,000 × 2,088 mm
- Location: Ibaraki, Japan
This machine has been carefully maintained in Japan and is ready for continued production use.
Key Features
- All-electric servo motor control system
- Direct pressure locking type clamping system
- Compact 55T class – suitable for precision and small-part molding
- Energy-efficient operation compared to hydraulic systems
- Stable and repeatable injection performance
💰 Asking Price: USD 12,900（FOB）
Special offer for our first MachineryLine listing.
MachineryLine Listing
Inspection under power is available upon request.
Immediate availability for export.
Inspection under power available in Japan.
This price is based on FOB Japan terms.
Inland transport, ocean freight, and marine insurance are not included.
CIF quotation can be provided upon request depending on the destination port.
Additional photos and videos are available upon request.
💳 Payment Method
• Bank transfer in USD is also accepted.
We can receive USD payments via our international bank account (Wise).
📹 Operation Video – Sodick LD55EH2 (55T)
The machine is currently under power and can be inspected in Japan.
Video taken in December 2025.
Full Machine View (Angled)
Angled overall view showing the complete machine structure including the injection unit and clamping section.
Control Panel & Display Interface
Control panel and touchscreen interface. The machine powers on normally, and operational parameters are clearly visible.
Yushin YK-350X Take-Out Robot (Included)
Yushin YK-350X robotic take-out system mounted above the machine. The robot is included in the sale.
Clamping Unit – Moving Platen & Tie Bars
Close-up of the moving platen and tie bars, showing clean surfaces and well-maintained structural components.
Clamping Unit – Fixed Platen
Detailed view of the fixed platen and mold mounting surface, demonstrating normal industrial wear consistent with light usage.
Injection Unit & Screw Assembly
Injection unit and screw housing assembly. Components appear intact and properly aligned.
Machine Condition
🔹 Operating History & Utilization
- Total operating hours: 15,136 hours
- Total shot count: 1,105,859 shots
- The machine is currently in good working condition and available for powered inspection in Japan.
With only 15,136 total operating hours over 18 years (approximately 10% average utilization), this machine demonstrates significantly lighter usage compared to typical industrial production equipment of the same generation.
🔹 Shot Count Analysis
ased on a total of 1,105,859 shots over 15,136 operating hours,
the machine averages approximately:
- 73 shots per hour
- 1.2 shots per minute
This relatively low shot frequency indicates light and controlled production use rather than continuous high-volume industrial operation.
The data suggests that the machine was operated under moderate production conditions, contributing to reduced mechanical stress and long-term preservation.
Specifications
🔹 Plasticizing & Injection Unit
Based on the official specification sheet
- Screw Diameter: 22 mm
- Plunger Diameter: 16 mm
- Max Injection Pressure: 176.4 MPa
- Theoretical Injection Volume: 14 cm³
- Max Injection Speed: 250 mm/s
- Plasticizing Capacity: 10.5 kg/h
- Max Screw Rotation: 300 rpm
- Temperature Control Zones: 7
- Heater Capacity: 6.6 kW
The 22 mm screw configuration is ideal for detailed and thin-wall precision components.
🔹 Clamping Unit
- Tie Bar Distance: 310 × 310 mm
- Platen Size: 440 × 450 mm
- Max Daylight: 550 mm
- Mold Thickness Range: 200 – 390 mm
- Ejector Stroke: 55 mm
🔹 Electrical Requirements
- Power supply: AC200/220V ±10%, 50/60Hz, 3 Phase
- Required power capacity: approx. 31–33 kVA
- AC servo motor capacity: 2.9 kW
- Hydraulic pump motor capacity: 5.5 k
🔹 Machine Dimensions
- Machine size: 2955 × 1000 × 2088 mm
- Machine weight: approx. 2300 kg
🔹 Specifications (PDF)
Detailed official specifications are available below.
Please download the PDF for full technical details.
Why Choose This Machine?
✔ Made in Japan – trusted manufacturing quality
✔ All-electric system – cleaner, quieter, energy-efficient
✔ Ideal for precision small parts production
✔ Compact footprint for flexible factory layout
✔ Ready for export from Japan
🔹 Typical Applications (55T Class)
This machine is suitable for:
- Cosmetic caps, small containers
- USB housings, connectors, electronic components
- Automotive clips, switches, small interior parts
- Small precision industrial components
- Toys and hobby parts
📩 Contact
For buyers who are already working with one of our Sales Partners,
we kindly ask you to continue communication through your respective partner for smooth coordination.
If you are contacting us directly, please feel free to reach out for:
• Final CIF/FOB confirmation
• Additional photos and videos
• On-site inspection in Japan (available upon request)
• Detailed shipping schedule and export documentation
WhatsApp: +81-80-8437-2162
E-mail: contact-info@olive-net.jp
We export worldwide and support professional overseas buyers.
You can also send your inquiry using the contact form via the button below.
Inventory Location & Sales Arrangement
This machine is currently owned and stored by our partner company in Japan.
Owner / Current Holder:
MK Co., Ltd.
3910-5 Nakayama, Inashiki City,
Ibaraki 300-1415, Japan
This machine is listed with the owner’s permission.
For all inquiries, inspections, price negotiations, and export arrangements,
please contact Japan Trading directly. Japan Trading acts as the official sales and export support partner for this listing.
🔹Download Product Sheet (PDF)
Anyone may freely download and share this PDF.
Simply forward it to interested buyers — we handle negotiation and export support.
Just share. We handle the rest.
Leave a Reply